+8618144082725

Sales@filters-king.com

Fuel Filter Cross Reference
Industry Information
Home News Industry Information

Cleaning, repair and replacement of dust collector bags

New Products

LATEST NEWS

Filters Element Technology

Filters Element Technology

CHINA EVERLASTING PARTS CO., LIMITED provide filters with high quality. And it has the following characteristics: High quality filter paper adhesive with the strong bond strength Bond the filter paper to the end cap effectively, Even they will not break off when the filter is under great pressure.Poor quality filter, The Filter paper glue with Poor adhesion, The sealing performance of the filter core is very poor, when the filter is under pressure, it will lead to crack. The impurity particles pass through the gap between the filter paper and the end cap Cause the filter without any filtration efficacy...

Cleaning, repair and replacement of dust collector bags
2019-05-18

In the dust collector, the cloth bag is an important part, which mainly plays the role of filtering and collecting dust and debris to achieve purification. The cleaning, maintenance and replacement of the bag of the dust collector are as follows.


1. Cleaning of the bag:


Cleaning: Select the appropriate washing materials, after strict ratio, and the cleaning strength should be moderate, the strength is too small, the cleaning is not thorough, and the lightness will cause damage to the bag.

 

Repair: If the bag is worn or corroded, it needs to be repaired to ensure that the bag can be used normally. However, if the situation is serious, professionals who require air handling equipment recommend replacing the bag.

 

Cleaning: By vibrating, the large dust particles in the bag are removed to maintain the filtration performance.

 

Drug soaking: It is the use of some chemical agents to remove oil stains or dirt that cannot be washed with water in order to increase the breathability of the bag.

 

Drying: Dry the bag with hot air at a temperature of 110 degrees Celsius. After the bag is dried, it must be guaranteed not to deform and retract.

 

Quality inspection packaging: After the cloth bag has been cleaned, it must undergo strict quality inspection. After the test is qualified, it can be packaged and affixed with a certificate.


2. Maintenance of the bag


If the bag is damaged, stop working immediately and repair it. If it is just a small hole, it can be bonded using a silicone rubber compound at the breakage. When selecting a binder, be aware that it should be compatible with the temperature, chemical properties, and process of the bag, otherwise problems may occur.


3. Bag replacement


If the bag is damaged seriously, or if a lot of tiny dust accumulates inside it, the cleaning effect is not ideal, and it has affected the use of the bag, it must be replaced. It is not necessary to stop the dust collector when replacing. Just turn off the cleaning controller and open the manhole door to replace it. After installing a new bag, clean it around.

online

scan it

chat Now Please click here for inquiry
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!