+8618144082725

Sales@filters-king.com

Fuel Filter Cross Reference
Industry Information
Home News Industry Information

Replace oil and oil filter steps

New Products

LATEST NEWS

MERV 8 Pleated Medium Efficiency Filters

MERV 8 Pleated Medium Efficiency Filters

MERV 8 Pleated Medium Efficiency Filters MERV 8 pleated medium efficiency filters are widely used in various air filtration systems due to their excellent performance and cost - effectiveness. These filters are designed with a MERV (Minimum Efficiency Reporting Value) rating of 8, which means they can effectively capture a wide range of airborne particles. They can trap dust, pollen, mold spores, and even some pet dander, providing cleaner air for indoor environments. The pleated design of these filters increases the surface area, allowing for better airflow while maintaining high filtration efficiency. This design also helps to reduce pressure drop, which means the air can pass through the filter more easily without putting too much strain on the HVAC system. As a result, the energy consumption of the system can be reduced, leading to lower operating costs over time. These filters are commonly used in residential and commercial HVAC systems, such as central air conditioning and heating units. They are also suitable for some industrial applications where moderate air quality control is required. By using MERV 8 pleated filters, you can improve the indoor air quality, reduce the risk of allergies and respiratory problems, and create a healthier and more comfortable living or working environment. WhatsApp / Wechat: +86 18965520297 WhatsApp / Wechat:+86 18144082725 Email:  Sales@filters-king.com

Replace oil and oil filter steps
2019-08-12
1. Run the machine to warm up, stop and close the air outlet valve, and unscrew the fuel plug one turn to let the system relieve pressure.

2. Open the drain valve and drain the oil. After draining the oil, close the valve and transport the oil to the local waste oil treatment center.

3. Remove the oil filter.

4. Clean the oil filter holder, add lubricant to the gasket of the new oil filter, and tighten the oil filter by hand.

5. Remove the filler plug and refuel until the oil level reaches the plug. Retighten the filler plug.

6. Run the machine for a few minutes, stop, and wait a few minutes for the oil level to stabilize. Allow the system to relieve pressure by unscrewing the filler plug. Refuel until the oil level reaches the request and tighten the screw plug. More filter details from www.filters-king.com.


CAT Oil Filter

online

scan it

chat Now Please click here for inquiry
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!