+8618144082725

Sales@filters-king.com

Fuel Filter Cross Reference
News

New Products

  • Genuine FBO60364 FBO 60364 Fuel Water Separator

    Genuine FBO60364 FBO 60364 Fuel Water Separator

    The Fuel Water Separator FBO60364 FBO 60364 FBO Series Replacement Cartridges are designed for use with FBO Filtration Assemblies. They are available as water separators, silicone-treated particle removers, and water-absorbing filters, with ratings of 1, 5, 10, or 25 microns.

  • Genuine RE554498 Exhaust Filter

    Genuine RE554498 Exhaust Filter

    The Exhaust Filter RE554498 Cross Reference V837079423 008821335 UF101 8-98169403-0 47364243 21516229 Application For Autocar,Blue Bird,DAF,Ford,Foton,Freightliner,Heuliez,Hino,International,Isuzu,Iveco,Kenworth,Mack,Peterbilt,R.V.I.,Spartan,Solaris,Volvo,Western Star,and Off-Hwy Equipment using Diesel Exhaust Fluid

  • Genuine 46595859 400406-00160 Crankcase Ventilation Filter

    Genuine 46595859 400406-00160 Crankcase Ventilation Filter

    The Crankcase Ventilation Filter 46595859 400406-00160 Cross Reference 7298180 5288839 CV52055 70024284 600-333-3900 Application For Bobcat,Cummins,Epiroc,Komatsu,Doosan Daewoo Equipment.

  • Genuine FBO60356 FBO 60356 Fuel Water Separator

    Genuine FBO60356 FBO 60356 Fuel Water Separator

    The Fuel Water Separator FBO60356 FBO 60356 Coalescer/separator filters are a two stage element that removes water and contaminants from diesel fuel streams and are the most popular filters.

  • Original FBO60329 FBO 60329

    Original FBO60329 FBO 60329 Fuel Filter

    The FBO60329 FBO 60329 FBO Series Replacement Cartridges are designed for use with FBO Filtration Assemblies.They are available as water separators, silicone-treated particle removers, and water-absorbing filters, with ratings of 1,5,10,or 25 microns.

  • 54107442 Air Filter

    54107442 Air Filter For Volvo Engine TAD551VE

    The Air Filter 54107442 Application For Volvo Engine TAD551VE,Konecranes Liftace Forklift F16-600C.

LATEST NEWS

The annual May Day has arrived

The annual May Day has arrived

The annual May Day has arrived During the May Day holiday, our will be closed for five days. This, also known as Day, has its origins in the labor movement and is celebrated in countries around the world. The commemorates the achievements and contributions of workers. The history of the May Day holiday dates back to the late 19th century when labor activists around the world began to organize movements advocating for better working conditions, fair wages, and reduced working hours. One significant event that led to the establishment of this holiday was the Haymarket affair, which took place in Chicago, United States, in 1886. The labor movement called for a general strike on May 1st to demand an eight-hour workday. Over time, May 1st became symbolic for workers' rights, and many countries adopted it as a public holiday. In China, the May Day holiday was formally recognized in 1949 and has since been observed nationwide. It provides an opportunity for people to take a break from work, spend time with their families, and engage in leisure activities. In our company, the decision to have a five-day break during the May Day holiday is to allow our employees to rest and recharge. It is also a gesture of appreciation for their hard work and dedication throughout the year. We believe that a well-rested workforce is more productive and motivated, and this holiday serves as a way to promote work-life balance. During the May Day holiday, our company encourages employees to enjoy their time off responsibly, engage in recreational activities, or use the time for personal pursuits. We hope that this break will provide our employees with the opportunity to rejuvenate and return to work with renewed energy and enthusiasm. Our sales Service online by email or WhatsApp during this long holiday, Welcome inquiry anytime. Email:Sales@filters-king.com WhatApp:+8618144082725

  • What are the effects of fuel filter replacement and non-replacement?

    What are the effects of fuel filter replacement and non-replacement?

    2019-05-31

    What are the effects of fuel filter replacement and non-replacement? Gasoline filtration is one of the common filter products, the main function is to remove impurities from gasoline. If the fuel filter is too dirty or blocked, the main performance is: when the fuel is added, the power is slower, or it can't get up, the car is difficult to start, sometimes it takes 2-5 times to catch the fire. Most engines are equipped with disposable, non-removable paper filter fuel filters. The replacement cycle is generally 10,000 kilometers. If you add less gasoline, it is not a problem to replace one with 15000-20000 kilometers. The filter has an inlet and outlet arrow mark, and should not be reversed when replacing. The fuel filter is to filter the impurities in the gasoline you usually add. It takes a long time. Your fuel filter is full of dirt, dirt and dregs. Therefore, it is recommended to change the number of kilometers. If you don't change it, or delay the change, it will definitely affect the performance of your car; for example, the oil road is not smooth, the car is not motivated, the time is long, the filter performance of the steam filter is greatly reduced, and finally the engine is damaged chronically, and even the engine is overhauled. If you don't change it, it will definitely bring a lot of damage to the car.

  • 2019 Quanzhou International Construction Machinery Exhibition ended successfully

    2019 Quanzhou International Construction Machinery Exhibition ended successfully

    2019-05-21

    2019 Quanzhou International Engineering Machinery Exhibition and CNC Machine Tool Special Equipment Expo showcases new products, new technologies, new materials and comprehensive solutions for customers in the field of machine tools and industrial automation, and strives to build a value exchange platform. It ended on May 20th, 2019. China Everlasting Parts Co., Limited in providing factory machinery parts and filters. If you have any needs or would like more information, you can always contact us for consultation.

  • Cleaning, repair and replacement of dust collector bags

    Cleaning, repair and replacement of dust collector bags

    2019-05-18

    In the dust collector, the cloth bag is an important part, which mainly plays the role of filtering and collecting dust and debris to achieve purification. The cleaning, maintenance and replacement of the bag of the dust collector are as follows. 1. Cleaning of the bag: Cleaning: Select the appropriate washing materials, after strict ratio, and the cleaning strength should be moderate, the strength is too small, the cleaning is not thorough, and the lightness will cause damage to the bag.   Repair: If the bag is worn or corroded, it needs to be repaired to ensure that the bag can be used normally. However, if the situation is serious, professionals who require air handling equipment recommend replacing the bag.   Cleaning: By vibrating, the large dust particles in the bag are removed to maintain the filtration performance.   Drug soaking: It is the use of some chemical agents to remove oil stains or dirt that cannot be washed with water in order to increase the breathability of the bag.   Drying: Dry the bag with hot air at a temperature of 110 degrees Celsius. After the bag is dried, it must be guaranteed not to deform and retract.   Quality inspection packaging: After the cloth bag has been cleaned, it must undergo strict quality inspection. After the test is qualified, it can be packaged and affixed with a certificate. 2. Maintenance of the bag If the bag is damaged, stop working immediately and repair it. If it is just a small hole, it can be bonded using a silicone rubber compound at the breakage. When selecting a binder, be aware that it should be compatible with the temperature, chemical properties, and process of the bag, otherwise problems may occur. 3. Bag replacement If the bag is damaged seriously, or if a lot of tiny dust accumulates inside it, the cleaning effect is not ideal, and it has affected the use of the bag, it must be replaced. It is not necessary to stop the dust collector when replacing. Just turn off the cleaning controller and open the manhole door to replace it. After installing a new bag, clean it around.

  • Air filter element for kubota harvester

    Air filter element for kubota harvester

    2019-05-11

    There are some characteristics of Kubota harvester air filter, which have a high density of laminated filter paper, a small stack gap, have a larger filter area, a better filtering effect, and a longer service life. The hard middle band is soft and elastic, the interface is better fit for the original car assembly, and meanwhile, it has good sealing property and buffer performance. The filtration efficiency of Kubota harvester air filter element is up to 99.98%.

  • Three elements that directly affect the service life of hydraulic oil filters

    Three elements that directly affect the service life of hydraulic oil filters

    2019-04-30

    The three factors that directly affect the service life of the hydraulic oil filter, the service life of the filter element in the hydraulic system is an important problem of the actual hydraulic system, especially in the case of high pollution conditions, the failure of the filter element and the resulting hydraulic system The fault is particularly prominent. There are three main factors that affect the life of a hydraulic filter: First, hydraulic oil filter filtration performance Filtration Accuracy: Filtration accuracy refers to the ability of the filter material to filter out particulate contaminants of different sizes. It is generally considered that the filtration precision is high and the life of the filter element is short. Second, the amount of pollution The amount of pollutants refers to the weight of particles contaminated by the filter material per unit area when the pressure drop of the filter material reaches a specified amount during the test. The filter element hole is easily retained by the accumulation of particulate contaminants through the channel, so that the pressure difference is increased, and when the pressure difference reaches the specified maximum limit value, the service life is terminated. The most direct parameter of the end of the filter life is that the pressure difference between the upstream and the downstream of the filter element reaches the pressure at which the bypass valve is opened. At this time, the dirt holding capacity of the filter element also reaches the maximum value. If the filter element is designed and manufactured, consider increasing the filter element. The ability to foul, that is, to improve the life of the filter. 1, wave height, wave number and filter area Under the premise that the outer dimensions of the filter element have been determined! Change the wave height, wave number and other process parameters to increase the effective filter area ofthe filter material as much as possible, which can reduce the flux of the unit filter surface and increase the dirt absorption of the whole filter element, and improve the filter life. By increasing the filter area ofthe filter element, the life of the filter element increases more often. If the wave number increases too much, the crowded folding wave will reduce the flow space of the hydraulic oil between the wave and the wave, so that the pressure difference of the filter element increases! The time difference of the differential pressure alarm is short and the life is reduced. It is generally preferred to keep the wave spacing between 1.5 and 2.5 mm. 2, the strength of the support network It is very important that the wire mesh of the inner and outer layers in the filter element structure has a certain strength. The wire mesh maintains the pleat shape to prevent bending and supports the filter material to prevent fatigue failure. Third, the pollution status of the hydraulic fluid during the use of the filter element After the filter element is ma...

  • May Day Holiday Notice

    May Day Holiday Notice

    2019-04-27

    We will meet Chinese Labor Day from May 1st, 2019 to May 4th, 2019. Our warehouse will be closed from May 1, 2019 to May 4, 2019. I can't ship it during this holidays, I hope you understand. During the holidays, if you have any need filters, please leave message or add my WhatsApp/wechat +8618144082725. I will reply you in the first time.

  • 30 cubic filter delivery site

    30 cubic filter delivery site

    2019-04-20

    The production of 30 cubic filters ordered by Sudanese customers is completed. Includes Caterpillar Filter, Fleetguard Filtration, Perkins Filtration, Ingersoll Rand Filter. Shipped and shipped this afternoon. China Everlasting Parts Co., Limited is most complete range of Filters Professional Supplier Since 2008. Our company is specialized in the production of various heavy duty oil filters, cabin air filter ,fuel filters and fuel water separator and other genuine filter replacement parts. If you have need any filter, you can feel free contact to me. Email:  Sales@filters-king.com WhatsApp:  +8618144082725 Wechat:  +8618144082725 Skype:  Filters-King

  • Visits from Malaysian customers

    Visits from Malaysian customers

    2019-05-08

    April 17th, Malaysian customers visited our company and visited our sample room. Our product manager explained many filter related contents to the customer, focusing on the filters of CAT and Ingersoll Rand. 1. Our product manager focuses on explaining several advantages of our CAT filter for our customers: Non-Metallic Center Tube;Spiral Roving;Molded End Caps Our Filtration Material is HV Filter paper or Ahlstrom Paper. 2. We discussed with the customer about Ingersoll Rand air filtration. Our Ingersoll Rand air filter materials and processes are the same as the original standards. After visiting the sample room, the customer took a group photo with our manager.

First << 1 2 3 4 5 6 7 8 9 10 >> Last
[  A total of  15  pages]
online

scan it

chat Now Please click here for inquiry
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!