+8618144082725

Sales@filters-king.com

Fuel Filter Cross Reference
Company News
Home News Company News

Caterpillar Engine Oil Filter

New Products

LATEST NEWS

Features and maintenance of Perkins generator set

Features and maintenance of Perkins generator set

Perkins is one of the first companies in the world to produce engine companies. Founded in 1932, Perkins has an annual production capacity of nearly 400,000 engines. The engines produced with diesel and natural gas fuels have been widely promoted and applied in various industries due to their economical, reliability and durability advantages. In order to enable our users to have a deeper understanding of our products, we now introduce the knowledge of Parkinson diesel generator maintenance. 1, the maintenance of the cooling system The new unit of the Perkins diesel generator set should be filled with coolant before starting. When filling, the deflation valve of the upper cooling system of the engine should be opened, and the coolant should be slowly added to the engine from the water supply port of the radiator tank until there is no air bubble and then discharged from the vent valve. The coolant should be filled below the neck of the radiator tank and should not be overfilled. After filling, the deflation valve is closed and the door on the water filter mount is opened to allow the DCA4 additive to mix into the cooling system. The cooling liquid used in the cooling system should mainly consist of pure water, antifreeze and DCA4 additive. Each liter of coolant contains 50% pure water, 50% antifreeze and 0.5 unit DCA4 additive. The well-equipped coolant can be used all year round and can be used continuously for two years. Pure water can be prevented from forming scale due to purification. Antifreeze refers to industrial ethylene glycol or propylene glycol, which can lower the freezing point of water and increase the boiling point of water. The concentration of antifreeze should be 40%. 68%, too high or too low concentration will affect the antifreeze ability of the coolant. In most climatic conditions, the recommended concentration of antifreeze is 50%, and the freezing point of the coolant can reach -33cC. The DCA4 additive forms a protective film on the inner surface of the water system to prevent cavitation and block deposits in the liner and body. 2, maintenance of the lubrication system SH grade oil; when the ambient temperature is lower than -5°C, use 10W-30CF4, CG4, CF4/SG, or CG4/SH grade oil. B and C series engines must use CF4/SG or CG4/SH grade oil. Our company mainly produces filters, Fuel Pump, Oil Pump, Belt, AVR, Electronic Actuator, Electronic Governor, Stop Solenoid, Generator Starting Controller, Oil Pressure sender, Switch, Sensors, Radiator, Alternator, Starter, Turbocharger, Meters, Truck Parts, Bus Parts, Other generator parts and Engine spare parts

Caterpillar Engine Oil Filter
2018-10-23

The oil itself contains a certain amount of colloid, impurities, water and additives.which will bring the debris contained in the oil to the friction surface of the sports side, accelerate the wear of the parts, and reduce the service life of the engine.


Caterpillar engine oil filters are designed to meet the needs of CAT engines by providing superior protection against particles that can make their way into the lubrication system during service or component wear.


Caterpillar engine oil filter element has four technology: Acrylic beads, Non-Metallic Center Tube, Spiral Roving, Molded End Caps.


There are Caterpillar engine oil filter OEM as follower:


1R-0716

8N-9586

7W-2326

4T-6915

1R-1808

119-4740

1R-0729

5I-7950

275-2604

120-0664

1R-0659

5J-8877

1R-0739

199-2239

1R-0726

471-7003

1R-1807

1R-0734

1R-0721

1N-4402

1R-0714

1W-8845

273-5711

194-9983

1R-0713

220-1523

8B-5935

269-8325

7W-2327

Caterpillar Oil Filter Group


CAT oil filter element


online

scan it

chat Now Please click here for inquiry
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!